BFCXQ - GREEN S.G. ALKYD ENAMEL

  • MSDS: BFCXQ
  • Manufacturer: EVERSEAL MFG CO INC
  • Product Name: GREEN S.G. ALKYD ENAMEL
  • National Stock Number: 8010-00-527-3197
Product Identification

Product ID:GREEN S.G. ALKYD ENAMEL
MSDS Date:01/01/1987
FSC:8010
NIIN:00-527-3197
MSDS Number: BFCXQ

Responsible Party
EVERSEAL MFG CO INC
475 BROAD AVE
RIDGEFIELD, NJ 07657-2329
US

Emergency Phone: 201-943-4986

Info Phone: 201-943-4986 / FAX 201-943-1123

Cage: 72988

Contractor
EVERSEAL MFG CO INC
RIDGEFIELD, NJ 07657-2329 US

Telephone: 201-943-4986

Cage: 72988

Ingredients

MINERAL SPIRITS

Fraction By Weight: 38%

ACGIH TLV: 120 PPM


RESIN

Fraction By Weight: 24%


SILICATE EXTENDERS

Fraction By Weight: 20%

ACGIH TLV: 2 MG/CUM(DUST)


TITANIUM DIOXIDE

CAS: 13463-67-7

RTECS: XR2275000

Fraction By Weight: 14%

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 10 MG/M3 TDUST; 9293


CHROMIUM (III) OXIDE

CAS: 1308-38-9

RTECS: GB6475000

Fraction By Weight: 1%

OSHA PEL 0.5 MG/M3 (CR)

ACGIH TLV: 0.5 MG/M3 (CR); 8990

Hazards

Effects of Overexposure:EYE-IRRIT. SKIN-DRYNESS. INHAL-POSS
ANESTHEIA,HEADACHE,DIZZY,NAUSEA,UPPER REPIRATORY IRRITATION.

First Aid

First Aid:INHAL-REMOVE TO FRESH AIR. SKIN-WASH W/MILD SOAP &
WATER;APPLY A MILD CREAM. INGEST-CALL A PHYSICIAN.

Fire Fighting

Flash Point:105F/41C
Lower Limits:0.7
Extinguishing Media:FOAM,CARBON DIOXIDE,DRY CHEM
Fire Fighting Procedures:WATER IS NOT A SUITABLE EXTINGUISHING MEDIUM
Unusual Fire/Explosion Hazard:NONE PROVIDED

Accidental Release

Spill Release Procedures:FLUSH W/WATER INTO RETAINING AREA OR
CONTAINER. AVOID SPARKS,FIRE OR HOT METAL SURFACES. SML QTY MAY BE
ABSORBED ONTO AN APPROPRIATE ABSORBANT.

Handling

Handling and Storage Precautions:KEEP COOL,AWAY FROM SOURCES OF
IGNITION. AVOID PROLONGED/REPEATED PERSONAL CONTACT. USE W/ADEQUATE
VENTILATION.

Exposure Controls

Respiratory Protection:CARTRIDGE RESPIR OR MASK-DEPENDS ON CONC ABOVE
TLV.
Ventilation:SUFFICIENT TO KEEP CONC BELOW TLV
Protective Gloves:IMPERMEABLE
Eye Protection:CHEM GOGGLES
Other Protective Equipment:APRON,BARRIER CREAM
Supplemental Safety and Health
MSDS-8/86

Chemical Properties

HCC:F4
Boiling Pt:B.P. Text:326-387F
Vapor Density:>1
Spec Gravity:>1
Evaporation Rate & Reference:<1 (ETHER=1)
Solubility in Water:NEGLIGIBLE
Appearance and Odor:GREEN LIQUID,SOLVENT ODOR
Percent Volatiles by Volume:60

Stability

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS
Stability Condition to Avoid:HEAT,SPARKS,OPEN FLAME FIRE
Hazardous Decomposition Products:CARBON MONOXIDE & CARBON DIOXIDE

Disposal

Waste Disposal Methods:INCINERATE UNDER SAFE CONDITIONS OR DISPOSE OF
IAW APPLICABLE LOCAL,STATE & FED REGS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.